|
|
|
|
|
|
|
|
|
|
What aspects should be considered when choosing the model of wood veneer dryer?
|
|
We know that there are many types of veneer dryers that we use in wood processing. Some people may wonder why there are so many models? That's because each model corresponds to different usage and wood materials. So how do we choose among these models that suits us? Now let the editor of Feixian Jinlun give you a detailed introduction!
1. Before selecting the model of wood veneer dryer, it is good to make a dry test of the raw materials, and to have an in-depth understanding of the drying devices that have been used for similar raw materials. Usually, it is helpful to choose the appropriate model. Scope of application.
2, first choose a drying device with simple structure, abundant supply of spare parts, high reliability and long life.
3, veneer dryer equipment must be able to apply special raw materials first, and consider the basic application requirements of raw materials, including the basic requirements for solving raw materials, and consider the basic requirements of output, dehydration flow, product quality and other aspects.
4. Low-cost operation. Operation costs such as equipment depreciation, energy consumption, labor costs, maintenance costs, and parts costs should be as cheap as possible.
5. Low energy consumption. The energy consumption index values of different dry modes are different. The thermal efficiency of the general transmission type is theoretically achieved, and the convection type is only about 70%.
Veneer dryer
6. It complies with environmental protection regulations, with good working standards and high safety factor.
7. Save project investment. For drying devices with the same function, sometimes the engineering cost differs too much, and the lower one should be used.
8. Dry speed is high. Only in terms of drying speed, when the thermal convection is drying, the aspect ratio of the raw material is dispersed in the warm air, the critical value is low water content, the drying speed is faster, and it is the same as the thermal convection, and the drying method is different. The moisture content is also different, so the drying speed is also different.
The above is about what aspects should be considered in the selection of wood veneer dryer models. If we want to improve our quality and efficiency, then it is necessary to choose the right model. Only when the right model is selected, the output and quality of our products , Efficiency will be improved. If you want to know about other veneer dryers, you can call our customer service hotline directly!
Veneer dryer Wood dryer Dryer model
|
|
|
|
|
|
|
|
|
|
|
