|
|
|
|
|
|
|
|
|
|
Jinlun machinery for you to explain the importance of knife adjustment and installation of rotary cu
|
|
Jinlun brand rotary cutting machine is now a good helper for plate manufacturers. It improves the efficiency of plate rotary cutting, saves manpower and material resources, and improves the economic benefits of the manufacturer. The rotary cutting machine is mainly composed of main driving machine, feed screw, feed screw, passive roller, cutter bed and cutter bed displacement sensor. After purchasing the rotary cutting machine, we carefully check its components to see if there is any damage.
Jinlun machinery for you to explain the importance of knife adjustment and installation of rotary cutting machine!
If the thickness of the blade is not adjusted, it will lead to the phenomenon that the thickness of the blade can not be adjusted, which will lead to the phenomenon that a large number of veneers can be broken after the blade is installed. Therefore, this rotary cutting machine blade debugging link is particularly important. It is mainly considered from the following aspects:
1. The blade height of the rotary cutter should be 0-1 mm higher than the center of the wood. If there is vibration during the rotary cutting, it is because the installation of the knife is too low. At this time, we adjust the blade to no vibration.
2. If the resistance of the rotary cutting is too high or the skin is broken, it is due to the high installation of the blade, so it can be adjusted to the appropriate level.
3. When installing, take the height of the center line of the clamp shaft as a reference. Rotate the bolt to set the height of the knife on both sides, and then locate the middle height. Make sure that the blade of the blade and the center of the clamp shaft of the machine are on the same horizontal line, and then tighten the nut.
Gold wheel rotary cutting machine
The above is the golden wheel machinery explained for you about the rotary cutter knife adjustment and installation of the important content, I hope you read to help you. Of course, if you want to know about the price of the rotary cutting machine, please call our customer service hotline at any time!
|
|
|
|
|
|
|
|
|
|
|
