|
|
|
|
|
|
|
|
|
|
Golden Wheel explains the wood rotary cutting machine lubrication maintenance tips and methods!
|
|
The wood rotary cutting machine is to achieve the work of rotary cutting wood through high-speed movement, and the high-speed running parts will produce wear. In order to reduce the wear, the running parts are often lubricated to reduce the wear caused by the movement and prolong the service life, thus ensuring the working efficiency of the rotary cutter. Next by the small compilation of the golden wheel machinery to explain for you in detail!
Golden Wheel explains the small tips and methods of lubrication and maintenance of wood rotary cutting machine!
The lubricating oil and grease are mainly used. The lubricating oil is liquid. The higher the rotating speed of the machine, the smaller the viscosity of the lubricating oil is used; non liquid friction is easy to occur. The lubricating oil with higher viscosity is required, and the viscosity of oil used for high working temperature should be increased; when the friction surface is rough, the oil with higher viscosity shall be used, otherwise, it is necessary to use low viscosity. Grease is solid, its advantage is that the seal is simple, need not be changed frequently, and has wide adaptability, but it has poor fluidity and poor heat conductivity, and can not be used as a circulating lubricant. When the speed is low, the load is large and the filling is inconvenient, the grease can be used. In order to strengthen the lubrication effect, the effect of adding some graphite powder to the grease is better.
Wood rotary cutting machine
Lubrication method of wood rotary cutting machine
Centralized lubrication of the first dilute oil station: customers can allocate their own lubrication system according to the actual situation.
Second forced lubrication: it is the lubrication of bearing and gear forced into the gearbox by auxiliary equipment.
Third immersion lubrication: all gears and bearings are immersed in the oil.
Lubrication of the fourth oil pool: generally, the reducer adopts splash lubrication of oil pool.
Rotary cutter
Above is about wood rotary cutting machine lubrication and maintenance when using some tips and methods, hope to help you. So our rotary cutter needs to be lubricated during maintenance. This operation is still very important. To learn about other problems about the spinner friends, please click to view the relevant article content!
|
|
|
|
|
|
|
|
|
|
|
